Equipment

Getting the Best Star Points for Astro Landscapes: How to Test Lenses for Coma

Itโ€™s time to talk about something scary that hides in dark corners. Itโ€™s an unwanted guest, and has ruined many star parties. The regret comes in the morning, and in the form of a lens aberration called โ€œcoma.โ€

The technical term is comatic aberration. This is not to be confused with chromatic aberration. They sound very similar. Chromatic aberration is color fringing at high-contrast edges in an image, and itโ€™s quite easy to correct in post-processing.

Comatic aberration, on the other hand, has to do with a different type of lens artifact. In night photography terms, coma is when stars start elongating or distorting to look like spaceships or seagulls (Figure 1)โ€”not because of problems with an exposure, but because of quirks in how a lens works. Coma ruins star points, but itโ€™s also a problem with star trails. Imagine: That odd shape drags across the sky, making large, fat trails that can be distracting in a composition (Figure 2).

Figure 1. See the odd shapes of the stars? Thatโ€™s coma. The shapes can also present as โ€œwingsโ€ or diamonds. Fuji X-T1 with 7Artisans 7.5mm f/2.8 fisheye lens. 58 seconds, f/2.8, ISO 6400.

Figure 2. Coma also presents a problem with trails, which will be fatter than normal. Fuji X-T1 with 7.5mm 7Artisans Fisyeve f/2.8 lens. 90-minute stack, f/2.8, ISO 6400.

While not impossible to work with in post, coma is tedious to repair (or to clone out, or to paint out with special brushes). To be frank, Iโ€™d rather re-shoot with a better aperture or lens than correct a photo full of coma.

Why Does Coma Matter?

When I got serious about astro-landscape photography, I paid attention to certain things that I believed directly affect the quality of the final image. Coma is one of those things that matters to me. And I know my colleagues at National Parks at Night also care about it at the same level. In fact, Lance Keimig was who first taught me about it.

Now I am at a crossroads. As I move fully to mirrorless on my Nikon Z 6, I want to replace all my F-mount lenses with native Z-mount equivalents. So I am testing a bunch of lenses to see exactly what I want to be carrying in my backpack. As I test, my primary criterion isโ€”you guessed itโ€”coma.

Coma most often occurs on fast, wide lenses. The most common culprits are lenses with apertures of f/2.8 or wider, which are exactly the lenses that are best for astro-landscape photography.

Milky Way over Bryce Canyon National Park, with very little coma. Nikon D750 with a Viltrox 20mm f/1.8 MF lens. Foreground exposure created by blending 25 frames in Starry Landscape Stacker, each shot at 13 seconds, f/2.8, ISO 6400. Foreground exposure 323 seconds, f/2.8, ISO 1600. Blended in Photoshop.

When coma occurs, it is strongest at the corners of the image. It appears less so at the top and side edges, and is unlikely to (but could) appear at the center.

The easiest way to reduce or eliminate coma is to stop down the lens. The aberration is likely to sufficiently diminish by f/5.6. But thatโ€™s an aperture thatโ€™s not usually wide enough to create shutter speeds that can capture sharp stars in an astro-landscape image.

So the better alternative is to have a lens that doesnโ€™t need to be stopped down to begin with. All lenses have coma to some degree, but some lenses are certainly better than others. In night photography, we want fast ultrawide lenses in which coma disappears or is nearly nonexistent at f/2.8. Why? Because thatโ€™s whatโ€™s best for star-point and Milky Way photos.

This is the reason we love the Nikon 14-24mm f/2.8. It exhibits almost no coma when shot wide open. This is also why we love the Irix 15mm f/2.4. It too exhibits almost no discernible coma when shot at f/2.8. Both of these lenses are extraordinary.

Unfortunately, my goals for my new kit take me away from these dear optics. While both of those brands are working on Z-mount versions of those lenses, neither has a release date. Also, I do not want to carry an FTZ adapter. While it does allow any F-mount lens to be mounted to a Z-series camera, those lenses tend to be heavier than Z-mounts. Lighter, more compact lenses are part of why I wanted to go mirrorless to begin with. So onward I must journey.

I strive to make the highest-quality photographs I can. I do some printing now, and I plan on doing even more this winter. So when I make 20-inch, 30-inch or 40-inch prints, I want them to evoke the feelings I had when visiting the gorgeous destinations where I made the images.

Night photography is a process of acknowledging which variables are hard boundaries and which are acceptable areas for compromise. Coma is one place I will not compromise. Therefore, I test all the lenses I consider for purchase. I suggest you do the same. To that end, below I will reveal how I recently tested four lenses, and will discuss how to interpret the results.

Preparing a Lens Test

This part is really simple. Grab a notebook and a pen. Draw a grid/table. At the left, write the full apertures of your lenses as rows going downward. Across the top, make a column header for each lens you are testing.

Note: Yes, for sure itโ€™s good to run these tests on lenses youโ€™re thinking of buying. Rent one, borrow one from a friend, whatever. But itโ€™s also good to test lenses you already own, so you know where and when they begin to fail you. Then you can compensate in the field when needed.

My notes from this test. Why am I making notes during the test rather than just checking metadata in Lightroom? Because none of the ultrawide lenses I was testing have electronic contacts, which means the metadata does not contain either the make/model of the lens nor the aperture used in the exposure.

These are the four lenses I recently tested:

  1. Samyang MF 14mm f/2.8 for Nikon Z

  2. Venus Optics Laowa 15mm f/2 FE Zero-D for Nikon Z

  3. Viltrox 20mm f/1.8 MF for Nikon Z

  4. ZEISS Distagon T* 15mm f/2.8 ZF.2 for Nikon F

B&H Photo kindly sent me the Samyang and Laowa for evaluation. I tested these against my tried-and-true Zeiss Distagon. I own the Viltrox, having chosen it already to replace my 35mm Sigma Art as my standard wide lens and for shooting panos.

Performing the Coma Lens Test in the Field

I chose a new moon, and I drove west for 15 minutes out of Catskill, New York, where farmland leaves broad, open, dark rural skies. This combination of choices gave me the maximum number of stars to work with. (If you run your test during a different moon phase, do so a couple of hours before the moon rises or a couple of hours after it sets. You want to be able to see even the faintest of stars.)

Step 1: Nail the focus.

I set up a quarter-mile away from a traffic light so that I could use it to zoom in and really hit the perfect focus. For reference, I took a shot of each perfect focus. See below.

To ensure I ended up with stars that didnโ€™t blur due to movement, I used the following settings: ISO 6400 and the proper NPF calculation for sharp star points (using the Accurate setting in the PhotoPills calculator, as opposed to Default).

Step 2: Make a test shot at each aperture up to about f/5.6.

As noted earlier, this is where coma disappears on most lenses anyway. Moreover, youโ€™re highly unlikely to be shooting star photos at smaller apertures than this.

Step 3: Take Good Notes.

As you make your test images, look at them on the back of your LCD and note the filename in your notebook grid.

OK! Thatโ€™s all you really need to do in the field. But I suggest that you really take the lenses for a drive. Shoot some star stacks, some star trails, car trails, etc. Get cozy with the lens in general.

Examining the Coma Lens Tests Results

At 800 percent zoom, look at the shape of the stars.

  • acceptable/ideal = round and crisp

  • unacceptable/comatic = irregular shapes that look like birds, flying saucers, donuts, cigars, etc.

Itโ€™s that simple.

Wanna pixel-peep? Download the full-resolution JPGs from my test:

The results of my lens test?

  1. I am purchasing the Laowa 15mm f/2 Z-mount and selling my Zeiss Distagon F-mount. Surprisingly, the Laowa has a little less coma than the Zeiss at f/2.8. And the former feels like half the size. Thatโ€™s a double win.

  2. The Samyang has coma even at f/5.6, so itโ€™s not a good lens for astro-landscape photography.

  3. The Viltrox 20mm f/1.8 is a keeper! No coma at f/2.8. Perfect for star points. Itโ€™s heavy, but the focus is smooth and itโ€™s sharp as heck.

Now I can rest easy knowing that my first two native Z-mount lenses are friendly to night photography.

I hope this helps you both understand what coma is, and how to perform your own reliable tests. Now go and test your lenses. Share the results in the comments below or on our Facebook page๏ปฟ

Matt Hill is a partner and workshop leader with National Parks at Night. See more about his photography, art, workshops and writing at MattHillArt.com. Follow Matt on Twitter Instagram Facebook.

UPCOMING WORKSHOPS FROM NATIONAL PARKS AT NIGHT

The Z 6 is the Best Camera for Night Photography

Letโ€™s not bury the lead. The Nikon Z 6 is the best camera for night photography.

Bold statement, I know. We live in a golden age for night photography, when there arenโ€™t many โ€œbad camerasโ€ for photographing in low-light scenarios. Last December I tested the current batch of full-frame mirrorless cameras for a night photography series produced by B&H Photo. All three cameras I testedโ€”the Canon EOS R, Nikon Z 6 and Sony a7R IIIโ€”performed admirably. In fact, none of them would hold me back from producing excellent work during the day or night.

At that time I was โ€œdatingโ€ a lot of camera systems. I really liked the Fuji X series because of the smaller bodies and lenses. But I was noticing a granular quality to my higher-ISO images that was troublesome for me. My maximum usable ISO for dark sky work with the X system was 6400, which worked most of the time.

The other camera in my bag is the Nikon D750. This is one of my all-time favorite night cameras. The colors and sharpness perfectly match my work. Yes, it is a 5-year-old camera, but guess what? It has damn good image quality and is a full-frame camera that costs $1,099 refurbished or $1,496 with a free year of Adobeโ€™s Photography Plan. Itโ€™s hard to disregard that, even if it is a second camera.

Still, the more I have used the Z 6, the more I like itโ€”enough so that I felt compelled to call it the best for the type of work I do, and to write down why.

What I like in a Night Camera

Before we get into exactly what I love about the Z 6 in particular, letโ€™s go over what I look for and recommend in a night camera in general.

A lot of cameras are goodโ€”heck, these days a lot of cameras are great! I know this first-hand, because while working at B&H Iโ€™ve been lucky enough to try a wide variety of whatโ€™s on the market. But it takes a special set of features for a camera to be great at night photography. Below Iโ€™ll run through what I believe those features to be, and then Iโ€™ll go over how the Z 6 checks (or, in some respects, doesnโ€™t check) those boxes.

It has to fit just right

When standing at the edge, be comfortable with your gear.

First off, choosing the right camera is like shopping for shoes. Style points count, but the bottom line is it has to fit you and your needs. It has to be ergonomic to hold and be an extension of your eye, heart and hand. The camera, as well as the many buttons that decorate it, has to be โ€œone with youโ€ and not get in your way of seeing and creating.

Every camera has a learning curve, but if after a month of heavy use you are still struggling with what the buttons do, or if you feel uncomfortable with it, then it is not the best camera for you.

High ISOs are a must

Capable high ISOs are the next big factor. You need to like the image quality at 6400โ€”otherwise, you will not be shooting the Milky Way. If you can get to ISO 12,800 or 25,600 comfortably, thatโ€™s even better.

Almost every camera from the last 3 years can get to ISO 6400 without the image being too grainy or noisy. Almost every camera also has ISO settings above 6400, but very few have good image quality beyond that point. (Weโ€™re not going to get into image quality charts and the like, but a little later in this post I will share real-world night photos and we will compare ISOs between competing cameras.)

The Nikon Z 6 at ISOs 12,800, 25,600 and 51,200.

Testing high ISOs is very subjective. You and I could own the same camera and I could love it at 12,800 with some gentle noise reduction in post, while you could absolutely hate the same. We all have different thresholds. Get to know and understand yours.

Test your camera at 6400, 12,800, 25,600, and all the stops in between. Bring the images into Lightroom and zoom to 100 percent, and drag the Luminance slider to see how it balances removing noise versus losing detail. If you are seeing color in that high ISO noiseโ€”splotches of red, green and blueโ€”then push the color slider to the right until it is removed. You can be more aggressive with the color noise slider as there is no loss of image detail, even at 100 percent.

How well can the camera see in the Dark?

One of the biggest frustrations with dark-sky night photography is that itโ€™s hard to see anything through the viewfinder, EVF or LCD screen. DSLRs have a slight edge here. When you turn on a DSLR, the meter information inside the viewfinder is actually pretty bright and makes it hard to look through. However, you can adapt in two ways, both of which are excellent solutions for composing in the dark:

  1. If you turn off the camera and look through the optical viewfinder without all the internal lights, then you can see pretty well.

  2. A little trick Chris Nicholson taught me (which Lance Keimig taught him) is to shine a flashlight through the back of the optical viewfinder and the light coming out of the other end (i.e., the lens) will shine onto the scene in front of you illuminate exactly what is in the frame.

But you can do those things only with a DSLR. For a mirrorless camera, seeing in the dark is a struggle. For the most part, the EVF or LCD screen canโ€™t โ€œgain upโ€ for us to see anything. So we have to take multiple high ISO test shots just to โ€œseeโ€ what is in the frame.

(However, in one of Sonyโ€™s latest firmware upgrades they introduced Bright Monitoring in their A7 and 6000 cameras. This is a game-changing feature for night photographersโ€”but it could also use some further tweaking. It does very well in most rural dark scenarios but in really dark-sky scenes like Bortle 1 or 2 with no moon, you will still see very little.)

What lenses can you use?

A wide and fast lens is mandatory for any sort of astro-landscape photographyโ€”so the camera needs to be able to accommodate.

Our favorite night lens is the Irix 15mm f/2.4. It is an inexpensive, manual focus lens that has a click stop at infinity, and infinity is accurate. The lens comes in three mounts: Nikon F, Canon EF and Pentax. I have used adapters to mount the Irix on Fuji, Nikon Z and Sony without any issues, but rumors are swirling that Irix is working on mounts for Sony E, Nikon Z and Canon EOS R.

That being said, it is good to have a little variety in your lens choice. Wide fast zooms such as a 14-24mm f/2.8 or 16-35mm f/2.8 are great. A sharp 24-70mm f/2.8 would be my third choice.

That combo would fulfill most of my visionary needs on any given night, but unique lenses and fast primes that match the way I see can be inspiring. A wide tilt-shift lens, or a fisheye/superwide zoom such as the Nikon 8-15mm or Canon 11-24mm f/4, can add an extra oomph to compositions. Iโ€™m also a sucker for the Zeiss Batis lenses for Sony and Zeissโ€™ standard razor-sharp manual focus lenses.

Why I Love the Z 6

OK, it wasnโ€™t love at first sight. But as a Nikon user, I was pretty excited to test the Z 6 and its rumored high ISO capabilities. Then my initial tests blew me away, so I purchased one last January.

Weโ€™ve had way more ups than downs, and weโ€™ve been living together nicely for the last 9 months. Iโ€™m still waiting for the โ€œperfectโ€ Nikon Z lens (more on that later), but while waiting Iโ€™ve noticed that some of my favorite photos Iโ€™ve made this year have been with my Z 6. Below is the breakdown of our โ€œrelationship.โ€

Comfort

It is a super-comfortable camera for me. The grip fits nicely in my hand. I really like the thumb rest on the back of the camera, as it helps with the overall balance. The camera is light for a full-frame mirrorless, and is easy to carry on your shoulder for long periods of time.

Controls

The menu system follows the same logic as its DSLR predecessors, so as someone who has used Nikon for years, this camera was a cinch for me to pick up and start shooting. The buttons are easy to navigate and use. I also like the touch screen for zooming and swiping through images. (However, I do not like the touch screen for triggering the camera.)

Iโ€™m a big fan of the LED top screen that gives me all the information I need to know: shutter speed, aperture, ISO, battery life, burst mode and shots left. This is the digital version of the LED screen on the top of most DSLRs. It doesnโ€™t draw as much juice as the screen on the back, and it grants easy access to that information for making adjustments.

Memory Card

I have no gripes over the single memory card slot. I have yet to fill up my 64GB XQD card on any given night. And believe me, Iโ€™ve shot for many hours!

Power

Battery life is solid. The Z 6 uses the same tried-and-true ENELb-15 battery that all the Nikon prosumer DSLRs use. Consequently, I can bring the same battery and dual charger for both my Z 6 and D750. The Z 6 draws more power because of the constant LCD/EVF use, but I have yet to need more than two full batteries on a given night.

High ISO

This camera is the current champ for high ISO. The Sony a7S II is close, but the big separator is that the Z 6 is a 24-megapixel camera and the a7S II is only a 12-megapixel. Thatโ€™s double the megapixels, which provides finer detail and smoother tonal transitions. You are not going to make large prints with an image from the a7S II unless you are finessing a lot in post.

Negatives (Not the Film Kind)

On the flip side, I do have gripes with the Z 6โ€”which is OK, because there is no perfect camera.

Lens Lack

First and foremost is this plea: Nikon, hurry up and make some more lenses!

My favorite Z lens right now is the 14-30mm f/4. I love the compactness and I really donโ€™t miss the extra stop of an f/2.8 version because I can go to those higher ISOs without worry (more on that later). I did test the 14-30mm against the F-mount equivalent, the Nikon 14-24mm f/2.8, which is one of my all-time favorite lenses. The cost difference is minimal right nowโ€”the f/2.8 F lens is currently $1,895 and the f/4 Z is $1,295. I donโ€™t see much loss in image quality with the latter, so Iโ€™m torn. A 14-24mm f/2.8 Z-mount is in the works, but I assume it will be over $2,000.

One might argue that I could just use any F-mount lens I want by employing the FTZ adapter๏ปฟ. But Iโ€™m not a fan of this tool. When I mount a camera body to a tripod and want to take off the FTZ adapter and lens, the FTZ mount gets in the way. To remove the FTZ mount and lens, I have to take the camera completely off the tripod, then swap lenses. This is definitely annoying.

(I applaud Canon for what they did with their offering of four different adapters, including ones that have a built-in neutral density or circular polarizer filter. This is great especially when you want to adapt superwide-angle lensesโ€”which donโ€™t take screw-on filtersโ€”to a mirrorless camera.)

Non-Articulating Screen

I like cameras with articulating arm screens instead of just the tilting-up-or-down version found on most bodies, the Z 6 included. Yeah, I understand that is adding more โ€œfragileโ€ components, but the articulating LCD does a few things I love:

  • I can always flip my screen and protect it from scratches.

  • People want their cameras to emulate their phones. Letโ€™s face it, phones did a great job of copying the best functions of cameras; time for camera companies to take it back!

  • Iโ€™m not a selfie guy but I do like taking self-portraits and putting my camera in low and different angels. The articulating angle arm gives more options.

The articulating arm screen that flips out (left) is much more functional than a screen that just tilts (right).

Lightroom Tinkering

Nikon hard-bakes some very aggressive noise reduction that gets automatically applied upon import to Lightroom. The amount of reduction depends on the ISO.  I definitely suggest taking a good look at this automated noise reduction and customizing it to taste. With Z 6 images, the default noise adjustments are as follows:

  • For ISO 6400 it applies 43 points of luminance, 75 points of detail, 10 points of color.

  • For ISO 12,800 it applies 46 points of luminance, 75 points of detail, 10 points of color.

  • For ISO 25,600 it applies 49 points of luminance, 75 points of detail, 10 points of color.

  • For ISO 51,200 it applies 52 points of luminance, 75 points of detail, 10 points of color.

This is a bit aggressive. I would definitely go in and cook that to taste. Iโ€™ve found that zeroing out the amount of luminance and color noise and then adding 10 to 30 points of each cleans up things nicely and retains the detail.

Z 6 Compared to the Others

So there you goโ€”a feature-by-feature breakdown of why I love the Z 6 (despite the few things I would change about it). But why do I say itโ€™s better for night photography than the other options out there?

There are lots of features we can compare, but the point here is about night photography, therefore the feature we care about most is performance in low light. So letโ€™s take a close look at the high ISOs of the latest full-frame mirrorless cameras. (There havenโ€™t been many DSLRs released in the last year, except Canonโ€™s recent EOS 90D, which I havenโ€™t been able to test yet. Besides, mirrorless is the future.)

Note: To see the full-resolution versions of the comparison images below, visit here to download.

Sony a7R III

Let me preface this by saying that it is really difficult for a high-megapixel camera (over 30 megapixels) to produce clean ISOs above 6400. Think about it. All the full-frame cameras have a fixed amount of space in which to fit millions of pixelsโ€”the more that you cram in, the smaller the pixels get, and their โ€œwellโ€ to receive light also gets smaller. Algorithms continue to get better but the sweet spot for a full-frame night camera is 24 to 30 megapixels.

That being said, the a7R III performs really well. There is no doubt why this camera has been incredibly popular for Sony.

The full-frame views of all these shots look good, but when we zoom to 100 percent and pay attention to the granularity of the sky and shadow regions, thatโ€™s when we notice a difference.

  • 6400: Normal noise. Looks normal with no loss of detail in the brick and woodwork.

  • 12,800: Acceptable noise. We can definitely see grain in the sky as well as in the wood and brick. But a gentle use of noise reduction (say, 20 points) would make this an acceptable ISO to use in the field.

  • 25,600: Too much noise. This is where the a7R III breaks for me. It looks like we are shooting through a nylon stocking. There is noise from top to bottom. An aggressive amount of noise reduction (with a subsequent loss of detail) would be needed to make this work for me.

Canon EOS R

The EOS R has the same sensor as the Canon 5D Mark IV, which isnโ€™t a bad thing, as that has been a popular night camera for Canon users.

  • 6400: Acceptable noise. But it looks like ISO 1600 or 3200 in the film days. Applying noise reduction by 10 to 15 points should clean that up just fine.

  • 12,800: Too much noise. While I was testing, a car drove by and lit up the scene, but we can still see a heavy layer of noise over the whole image. Finessing the noise and detail could salvage the photo, but this would really be my breaking point if I was a Canon user.

  • 25,600: Yeah, no. Lots of noise and grain here. I would need to be aggressive in removing it and thus lose a lot of detail. Best to not go this far.

Nikon Z 6

Hereโ€™s why itโ€™s better than the rest.

  • 6400: Minimal noise. Iโ€™m impressedโ€”itโ€™s cleaner than any other camera I have tested at ISO 6400. Iโ€™d set noise reduction to 5 or 10 points, and then it looks almost like ISO 800.

  • 12,800: Normal noise. It looks like the competitionโ€™s ISO 6400. Not much loss of detail at all. Iโ€™d set luminance and color noise reduction between 10 and 20 to make it even cleaner.

  • 25,600: Acceptable noise. Definitely seeing the noise, but I can work with it. Setting the luminance and color noise to 20 or 30 points, the situation is remedied with minimal loss of detail. I would still try to slightly overexpose my image in this scenario, as opening up shadows in post-production would create more troublesome grain.

  • 51,200: Too much noise. This is my breaking point with the Z 6. We are getting that layer of grain over the entire image and losing detail. I can be aggressive with my noise reduction and might be able to work with an image, but chances of making it good enough for a large print are minimal.

Wrapping Up

For night photographers, creating great images at high ISOs is a must. I found the top three full-frame mirrorless cameras to be quite capable of ISO 6400, and I might even dip into 12,800.

The Z 6 separates itself by getting 1 to 2 stops better with cleaner ISOs. And that for me is a game-changing camera for night photography. It means I can pretty much shoot in any dark sky condition, even with an f/4 lens, and come away with excellent image quality.

Is it a perfect camera? No, but nothing is. Bedsides the excellent high ISOs, the other winning points are:

  • the comfort of the camera

  • familiar menu system

  • adapting to a lens ecosystem that I am happy with

Iโ€™m looking forward to more native Z-mount lenses coming in the near future and hopefully a new FTZ adapter that doesnโ€™t get in the way of my tripod work. And above all, Iโ€™m looking forward to the Z 6 enabling me to seize the night better than I ever have before.

Have you tried the Z 6 at night yet? Are you happy with it? Letโ€™s continue the conversation in the comments section below or on our Facebook page.

Gabriel Biderman is a partner and workshop leader with National Parks at Night. He is a Brooklyn-based fine art and travel photographer, and author of Night Photography: From Snapshots to Great Shots (Peachpit, 2014). During the daytime hours you'll often find Gabe at one of many photo events around the world working for B&H Photoโ€™s road marketing team. See his portfolio and workshop lineup at www.ruinism.com.

UPCOMING WORKSHOPS FROM NATIONAL PARKS AT NIGHT

(No, Weโ€™re Not Crazy) Why You Should Use a Circular Polarizer at Night

I had another โ€œWhat if?โ€ moment, dear readers.

It was this: What if I use a circular polarizer at night?

My mind boggled. It balked. It basically said, โ€œThere are tons of reasons you should not even consider doing that.โ€

Such as:

  • Youโ€™ll lose up to 1.5 stops of light! My precious light โ€ฆ

  • Itโ€™s going to be hard to see the effect through the lens.

  • A polarizer is another thing to carry and/or take care of. (Have you seen my backpack? I call it the โ€œkitchen sink.โ€)

  • Your sensor will capture fewer starsโ€”perhaps?

  • You may be disappointed.

So What?

Despite all those naysaying, braying voices in my head, I set about scraping out some moments during our Rocky Mountain National Park workshop to run some experiments.

Why? Well, I know polarizers have these positive traits:

  • minimized reflections, making water easier to see through

  • more vibrant colors and deeper saturation

  • reduced highlights, which puts more of the exposure inside the dynamic range of my camera

  • eliminating or reducing off-axis light

That last one was really exciting to me, as we would have lots of moon at Rocky Mountain, as well as at our workshop immediately afterward at Chaco Culture National Historical Park.

Maybe, just maybe, I could make a polarizer do something usefulโ€”or even something amazing.

Note: Since my polarizer was a screw-in 95mm, I did not go through the hassle of removing it during tests. I simply set it to minimum effect for the โ€œbeforeโ€ images and maximum effect for the โ€œafterโ€ images.

Testing My Hypothesis on Star Trails

So I set out to test my hunch that it would work. After all, itโ€™s just science, right?

On our final day of the workshop, we embarked on an add-on adventure with five attendees, during which we hiked with our gear almost 2 miles (one way) with 650 feet of elevation gain at over 8,000 feet of altitude. It was challenging, but we did it.

Our first shoot location, Emerald Lake, had a moon shadow slipping around to the right. The moon was at my left shoulderโ€”ideal conditions to make a polarizer work.

Tip: Polarizers work best when used perpendicular to the light source (90 degrees). So keep the moon (or sun, if you are so inclined), on your right or left shoulder.

I set the polarizer to minimum effect:

Nikon D850, Zeiss 15mm Distagon f/2.8. 30 sec, f/2.8, ISO 6400.

Exactly what Iโ€™d expected. Not a lot of stars. So I turned off my camera, peeped through the viewfinder, turned the polarizer and found the area of deepest effect:

Nikon D850, Zeiss 15mm Distagon f/2.8. 30 seconds, f/2.8, ISO 6400.

I was so excited (and it was so cold) that I settled into a sequence of eight 7.5-minute exposures, totaling one hour:

Nikon D850, Zeiss 15mm Distagon f/2.8. Eight frames at 7.5 minutes, f/2.8, ISO 6400.

Booyah. Many stars, despite shooting with broad moonlight. It worked!

As we started hiking back down, we stopped at Dream Lake. I wandered to the south end of the lake with a student and set up another test, this time with stiller water. (There had been crazy wind up at Emerald Lake.) I ran two high ISO tests at 15 seconds, f/2.8, ISO 6400:

I loved what was happening so much that I wanted to grab two 15-minute exposures to compare:

(I wish Iโ€™d done the โ€œwithoutโ€ photo first, because the moon came out more during that exposure.)

So, then I had another โ€œWhat if?โ€ moment during editing. What if I used the water from the zero-polarizer shot and masked it in to the yes-polarizer shot?

Nikon D850, Zeiss 15mm Distagon f/2.8. 15 minutes, f/2.8, ISO 100. Maximum polarization (in the sky portion).

Again, a wonderful solution for pulling out more stars and deeper, darker skies. Plus, if you shoot both, you can choose the best of each and blend them together. Thatโ€™s powerful stuff.

And then the Rocky Mountain workshop was over. โ€ฆ But I had another workshop (with Lance) in two days, so Chris and I hustled down to Chaco Culture. And during the second-to-last night, I had a couple of moments here and there to test again.

Facing north, I wanted to test how many stars I could capture at f/13 for a star trail rip.

Test shot No. 1. Nikon D750, Zeiss 15mm Distagon f/2.8. 25 seconds, f/11, ISO 3200. Maximum polarization.

Test Shot No. 2, with a different polarizer orientation: Nikon D750, Zeiss 15mm Distagon f/2.8. 25 seconds, f/11, ISO 3200. Three-quarter polarization.

I felt it had better skies. I wanted a touch darker, so I dropped to f/13 and I committed to a one-hour shot with Long Exposure Noise Reduction turned on.

I admit, I had to do some post work to pull out the stars on the skies, but theyโ€™re there!

Nikon D750, Zeiss 15mm Distagon f/2.8. 1 hour, f/13, ISO 50. Three-quarter polarization.

I think next time Iโ€™ll shoot such a photo at f/8 to see a touch more stars. But itโ€™s not the normal, cluttered sky we get without polarization and a much wider aperture. And the sky in the background is darkerโ€”much darkerโ€”which is something we donโ€™t generally see when shooting in moonlight.

But what about the Milky Way?

Well, what about the Milky Way? Itโ€™s a silly question, right? You canโ€™t shoot the Milky Way on a moonlit night.

Or โ€ฆ ?

This last test, if successful, would be the coup de grace, on my circular polarizer experiments. Can I extract a Milky Way from moonlit skies? It was an idea raised by Jason, a Rocky Mountain attendee who was on that hike with us the week before. And now I could try it out.

Now in New Mexico, we were shooting at Pueblo Bonito, the parkโ€™s showpiece ancient structure, which features over 600 rooms plus multiple kivas of fascinatingly intricate architecture.

There was a 25-minute window of darkness between the end of twilight and moonrise. We hustled to nail the Milky Way during that window, but I suspected I had an advantage with a circular polarizer and hoped I could make it appear even after moonrise.

As soon as the moon rose, people started repositioning to re-frame to make the Milky Way less important. They couldnโ€™t see it. But โ€ฆ maybe I could?

First shot, with minimum polarization:

Nikon D750, Zeiss 15mm Distagon f/2.8. 25 seconds, f/2.8, ISO 6400. Minimum polarization.

And then...

Nikon D750, Zeiss 15mm Distagon f/2.8. 25 seconds, f/2.8, ISO 6400. Maximum polarization.

Double booya. Ignoring the fact that someone did light painting in the foreground for this shot, check out that Milky Way! This is not a composite. Itโ€™s one frame, with some Lightroom adjustments.

You may notice that the area of sky around the Milky Way is darkest. Thatโ€™s not from a local adjustment in post, but rather thatโ€™s where the circular polarizerโ€™s effect happens. I strategically placed the effect right along the axis of the Milky Way. The polarization occurs only in that area (rather than the whole sky) because I am using a superwide lens and the effect covers a limited angle.

Anyway, back to the exciting part. I was able to shoot a clear Milky Way sky with a full moon lighting the landscape. My whoops of pleasure resonated from the canyon walls. I let out massive yawps of glee.

Folks, a revolution has arrived. You can put one more big gun in your bag to make your night skies sing. You can use a polarizer to photograph the Milky Way in moonlight.

When Does a Circular Polarizer Not work?

One caveat: When using ultrawide-angle lenses (like my Zeiss 15mm Distagon), you will discover that the area affected by polarization can be narrower than you want.

Check this outโ€”I adjusted the polarizer all around to find a sweet spot, but didnโ€™t find one: (

I also experienced some flare when the moon was at the edge of my ultrawide lens in the above.

So to avoid these two things that I found disadvantageous, I switched lenses to my 35mm, went vertical with a lens hood, and made a pano stitch (without a polarizer), and am very happy.

Note: Polarizing with pano stitches is rarely successful.

Nikon D850, Sigma 35mm f/1.4 Art. Ten frames at 10 seconds, f/5, ISO 6400. No polarizing filter.

So watch your images to be sure the effect is one you want to commit to, but give it a shot.

Wrapping Up

A circular polarizer is definitely worth putting in your toolkit for night photography. โ€™Nuff said.

And I canโ€™t wait to see what you do with this! Please test for yourself and post your results in the Comments section here or on our Facebook page. Weโ€™d love to see what amazing things you make.

Gear

For you gear geeks: I used the Benro Master Slim Circular Polarizing screw-in filter on my Zeiss 15mm Distagon.

In case your superwide lens doesnโ€™t accept a screw-in, know that many manufacturers, Benro Filters included, now make 100mm and 150mm square filter holders that allow for a circular polarizer to be mounted, as well as neutral density and graduated neutral density filters. Itโ€™s an amazing photography world we live in these days.

Matt Hill is a partner and workshop leader with National Parks at Night. See more about his photography, art, workshops and writing at MattHillArt.com. Follow Matt on Twitter Instagram Facebook.

UPCOMING WORKSHOPS FROM NATIONAL PARKS AT NIGHT

Finding Your Way in the Dark: A Guide to Seeing at Night

One of the biggest challenges of night photography can be simply finding your way in the dark. In the age of astro-landscape photography, navigating in unfamiliar territory under a new moon can be difficult, and sometimes just plain dangerous. Choosing the right light source is critical to the comfort and success of your photographic outing, for finding your footing, for setting up and adjusting your camera, and also for not ruining the experience of those you are photographing with.

Death Valley National Park. Photographers using red lights for light painting, walking around and focusing. This behind-the-scenes shot was a happy accident!

Seeing at Night

Itโ€™s tempting to use the brightest light you have to see where youโ€™re going. But itโ€™s actually better to forego the light whenever possible and let your eyes adjust to the darkness. Doing so lets you see the overall environment rather than just a garishly illuminated swath of light surrounded by a sea of black.

Ten to 15 minutes is enough time for most peopleโ€™s eyes to adapt in order to walk around by starlight without a light. You might be surprised to know that itโ€™s possible to drive by the light of the full moon if your eyes are fully dark-adapted! Itโ€™s quite an experience to be able to see the entire landscape at night while driving with the lights off. Iโ€™m not suggesting that you try this yourself, but Iโ€™ve done it out in the desert many times. It just goes to show how little light is needed in order to see.

This past winter Chris Nicholson was able to drive in Everglades National Park without headlightsโ€”just the moonlight over the landscape was plenty to light the way. Photo by Chris Nicholson.

Do Unto Others โ€ฆ

Another consideration when working with other photographers is that your light may adversely affect your colleaguesโ€™ images. Itโ€™s easy to forget that your light is on and walk into someone elseโ€™s photo, leaving a trail of light where it isnโ€™t wanted.

Or, if you are working in close proximity to others, shining a light on your camera to make adjustments before an exposure might accidentally light paint someone elseโ€™s foreground. Even the red lights on the back of some cameras or intervalometers can be enough to cause problems at high ISOs, and I recommend putting a piece of gaffer tape over them to prevent accidents. If you rely on the on camera or intervalometer light to help find your camera in the dark, make sure the light faces away from the scene you are photographing.

Night-Vision Tools

Some people will always need to use a light to get around, either due to low vision, balance issues or simply being afraid of the dark. Thatโ€™s OKโ€”Iโ€™m here to offer some solutions and guidelines for Finding Your Way In The Dark. (After all, I wrote the book on the subject!)

A time-lapse of a group of photographers at Olympic National Park. Thatโ€™s a lot of light! Photo by Matt Hill.

Headlights

Many people use headlamps for hands-free convenience in the field, but after about the 7,000th time a student approached me to ask a question with their headlight shining in my face, Iโ€™ve banned them from my workshops.

Besides, a headlamp on your head has more or less the same effect as a headlight on your carโ€“โ€“ it lights the path in front of you quite well, but you wonโ€™t see a thing outside the beam of the headlight. That makes it difficult to visualize your images, and to understand the terrain you have to work with.

If you do use a headlight (on your own outings), look for one with multiple brightness settings, a variable angle beam and a red light option. Our recommendation is the Coast FL75r. It has all of the features mentioned, and itโ€™s rechargeable!

Red Lights

Another popular option (mentioned above) is to use a red light to help preserve night vision. Astronomers have long used red flashlights in the observatory or in the field for this purpose, and it does help to preserve dark adaptation.

However, there are a number of downsides to using a red light. The highly saturated color of red LED lights tends to โ€œbleedโ€ into photographs in ways that are not desirable. Using a red light to get from point A to B is fine on flat ground, but can be downright dangerous on uneven ground because the red light severely limits your depth perception, as Gabe and I were recently reminded of while scrambling over the rock formations in Joshua Tree National Park.

Notice how the red light โ€œbleedsโ€ into the area surrounding these photographers at Great Sand Dunes National Park. Photo by Matt Hill.

Multi-Brightness Lights

Many flashlights these days have a variety of brightness settings from dim to super bright. Variable brightness comes in handy, as different jobs require different intensities.

Unfortunately, most flashlights default to the brightest setting, meaning that you have to click through the various options to find the one you want, often blasting your retinas with 600 lumens in the process. If you do use a flashlight with multiple brightness options, look for one that remembers the last used setting when next you turn it onโ€”or, even better, one that lets you program your favorite settings. (The FourSevens Quark lights do just that, but are temporarily unavailable as of this writing.)

Using an overly bright flashlight for focusing at Keyโ€™s Ranch in Joshua Tree National Park. This is a good way to knock out your dark adapted eyes for a good 20 minutes!

No Lights

If you have the luxury of time to wait for your eyes to dark adapt, you have good eyesight and youโ€™re traveling on level ground, I suggest trying to work without a flashlight except for light painting. It can take some to get used to, but is really quite enjoyable once you do.

Of course, it helps to memorize the key buttons on your cameraโ€“โ€“ exposure controls, info, image review, live view and magnify. Some camerasโ€”like the Nikon D500, D5 and D850โ€”have illuminated buttons, and the Pentax K1 has onboard LED lights in a few locations to illuminate the camera controls. If weโ€™re lucky, these features will become more common on future cameras.

Dim Lights

Perhaps the best option for most people is to find an exceptionally dim flashlight to use both for moving around and for adjusting your camera or finding things in your bag. I have found that a dim white light is just as good as a red light for preserving night vision, and is easier to work with.

Just as we adjust the brightness of our camera LCDs to match ambient light levels, we should do the same with our flashlights. The challenge is that flashlight manufacturers generally produce the brightest lights they can. Thereโ€™s been a โ€œlumen warโ€ with flashlights that parallels the megapixel war between camera manufacturers. An easy solution thatโ€™s already in your pocket is to use the lock screen or home screen on your phone. It has an adjustable brightness level and should be adequate for most situations. A single AAA cell Mini Maglite is another option.

DIY Dim Lights

Regular readers of this blog will know that we are big fans of Coast flashlights, and since our first season, our workshop students have received free HP1 flashlights compliments of Coast. Itโ€™s a great little light, and quite bright for its size.

Last fall, I was having a conversation with our Coast representative about the difficulty of finding a light that was dim enough for the purposes mentioned above, and he told me about a new model we might be interested in, the G9. Itโ€™s tiny, uses a single AAA battery and has a relatively dim, fixed beam. He sent me a sample, and with a quick and easy hack it turns out to be perfectly suited for illuminating your camera or the inside of your bag without ruining your night vision. Iโ€™m pleased to say that this year, our workshop participants will all receive a Coast G9 flashlight.

The Coast G9 flashlight is a great choice for night photographers.

The Coast G9 flashlight is a great choice for night photographers.

Now about that hack I mentioned: Unscrew the headpiece, place a bit of tissue or toilet paper behind the bezel, then screw the headpiece back on. The result is a soft, dim light thatโ€™s perfect for astro-landscape photography uses in dark sky environments. Itโ€™s also possible to add color-correcting gels while you have it open, if you prefer a warm light to the native daylight balance of the light. (Tim wrote a blog post about color-correcting flashlights last year.)

Most modern flashlights donโ€™t allow you to add diffusion behind the bezel, but you could always reduce the brightness of a flashlight with tissue or neutral density filters taped to the front of the light; itโ€™s just not as convenient.

In Conclusion

No matter how you light it, safety should be your first concern. If you need a brighter light to get around, by all means use one. Night photographers have been known to get themselves into questionable situations to get the shot, be it at the edge of a cliff, balanced on a rock ledge, or sneaking into condemned buildings full of broken glass and rusty metal.

Even if youโ€™re sticking to level ground, being prepared with the right light for the situation will make your experience better in the end. Be safe, and be mindful of those around you when working with flashlights in group situations.

I challenge you to Seize The Night and Find Your Way In The Dark!

Lance Keimig is a partner and workshop leader with National Parks at Night. He has been photographing at night for 30 years, and is the author of Night Photography and Light Painting: Finding Your Way in the Dark (Focal Press, 2015). Learn more about his images and workshops at www.thenightskye.com.

UPCOMING WORKSHOPS FROM NATIONAL PARKS AT NIGHT

A Guide to Light Writing Tools

When you turn your lights away from your subject and toward the lens, a world of creative opportunity opens up to you.

Light writing can be a fun and fantastic way to add "something extra" to a night photo, whether you're shooting a city scene, a natural landscape or night portraits. (In fact, we'll be playing with a lot of light writing tools and toys during our Catskills Night Portraiture this spring and fall.)

But what to use? Where do we start? Help, Matt!

Fear not, explorer of the night. โ€ฆ Grab a mug of cocoa and settle in. Let's get jiggy with light.


The Basic Tools

Flashlights

You can use a really bright flashlight (like a Coast HP7R) to make a visible beam in the sky, or a low-powered penlight (like the Coast A9R) or a simple keychain LED light for delicate scribing in the air.

Lomo also makes the really interesting Light Painter Z140TORCH.

Flashlight Add-Ons

When you use a flashlight, you can accessorize it by adding some cool tools made just for light writing (and painting, but that's another topic โ€ฆ).

Light Painting Brushes is the premier manufacturer that really understands light painters/writers. Jason Page (the creator) has made a robust system of tools to choose from, including plexiglass bladesfiber optic wands, color filters, light painting bottles and light swords. But if you really want to get serious about drawing in the air, snag a Light Writer set and loosen up your shoulder muscles.

Be sure to grab a Universal Connector and get started! FWIW, having this one accessory doubles as a great snoot. Kill the spill from the edges of your flashlight for more control.

Laser Pointers

Laser pointers aren't just for making cats dizzy. They are also a cool way to scribe really sharp lines on objects. Tip: Never point it directly at your lensโ€”it can irrevocably damage your camera's sensor.

Kerosene Lanterns

I love October, because there are lantern tours at cool places like Sleepy Hollow Cemetery. Waiting for a tour to walk through with that gorgeous upglow makes for delicious, warm light. 

A less combustible option is an LED camping lantern.

Lighters

Gosh, I haven't done this since I was a teenager (can't you tell by the above photo?). But grabbing a simple cigarette lighter and using it behind objects can create smooth, warm light trails. Just be careful not to burn your thumb!


Specialized Professional Tools

Pixelstick

The classic commercial realization of being able to write images in the air, one row of pixels at a time. Load your designs into the 6-foot Pixelstick and swing it around for massive light writing effects. 

Magilight

This 3-foot tool, currently still in crowdfunding mode on Indiegogo at the time of writing, promises some upgrades versus the Pixelstick, including a splash-proof design, a sliding/rotating handle, mini LED stick accessory and more. Fingers crossed they make it to production, and on time, because I can't wait to get my hands on one. (Or two!)

Make your own Digital Light Wand

Are you handy with electronics and programming? Well, you can make your own Pixeltstick/Magilight with the instructions provided by Michael Ross on his website. He released this project back in 2010, making him the O.G. digital light writing wizard.

Westcott Icelight 2

This powerful handheld LED wand has a rechargeable battery, diffuser, tungsten gel filter and more. Pointed toward the lens, it makes a smooth bar of light.

Night Writer

Darren Pearson (aka prolific and talented artist @dariustwin) created the Night Writer light writing system with interchangeable color tips so you can craft your fantasies in the air like Picasso.

Lapiz Freehand RGB

The Lapiz Freehand RGB is a tool I haven't used (yet โ€ฆ) but I had to share. It's for the artist who wants to draw their visions freehand. RGB controls, dimmer and 20 color presets with memory. Hella cool. Visit the website (link above) for some images showing what you can do.

Projectors

Digital projectors are tiny now! Pocket Pico Projectors even come with batteries. So, you can bring your images or designs out into the field and project them onto surfaces, people and more!


The Less-Than-Obvious Tools

Your phone or tablet

The flashlight and screen are both light sources. Plus, I bet you already have one! The larger the light source, the softer the effect.

I often use the GlowStickGo app to make pretty colors. The $0.99 upgrade is worth it.

Using other people's lights

In the above examples, I noticed hikers or climbers using headlamps and flashlights in my scene. Rather than gnashing my teeth, I said, "Heck, let's use this as an advantage."


My Favorite Toys

Balloons

Either stuff a glow stick inside pearlescent balloons, or get some with the LEDs already inside. Makes a soft, ethereal effect.

Battery-powered Christmas lights

Christmas lights make sharp, crisp lines of light. And if you tape them together in a bundle, you can create a bright grouping of light streaks. Or you can be like one our Death Valley attendees and make a suit out of them, put it on, then frolic in front of your open shutter. Be sure to get battery-powered lights, or you'll have to bring a noisy gas-powered AC generator.

LED Frisbees

Want a good workout? Try throwing an LED Frisbee back and forth with a pal for eight minutes without pause. It will test your endurance, but makes for fun night photography!

LED Helicopters

I love these little rubber-band launched LED toy helicopters. Keeping three to five of these in my bag takes up barely any room at all. Creating mysterious alien landings anytime is easy.

Glow Sticks

I love the foxfire effect that glow sticks have. They aren't very bright, but they can add a subtle mystery to your light writing, and are small and easy to carry.

Poi Balls

Poi Balls are as fun as a Hula Hoopโ€”without need for bodily coordination.

EL Wire

Slightly brighter than a glow stick. I use EL Wire to make fire effects, without the danger. 


Dangerous Things You Should not do Within a National Park or Without Safety & Planning

Sparklers

Duh. Fireworks are forbidden in national parks. Don't do it. But when and where you are allowed to use sparklers, there is no substitute! Sparkly, drippy fun.

Steel Wool

Again, don't light fires in national parks except where expressly permitted. Like in campsites. In fire rings. And not with steel woolโ€”stick to a lighter, or rubbing two sticks together. But for those times when you're in a place that does not have those restrictions, and it's near/on water or in the rain, and not on or near wood, spinning steel wool in a wire whisk on a string makes for some amazing effects.

Household Lighting Fixtures

Some lighting fixtures have an AC cord (not hard-wired). I've experimented with swinging them through a long exposure with great success.


Wrapping Up

So, you may think I'm nuts. Couldn't agree with you more. I am nuts about lights, and experimenting with them. I hope you try all of the above!

Have you tried something I didn't mention? Let me know in the comments! I'm game for some more light writing fun.

Matt Hill is a partner and workshop leader with National Parks at Night. See more about his photography, art, workshops and writing at MattHillArt.com. Follow Matt on Twitter Instagram Facebook.

UPCOMING WORKSHOPS FROM NATIONAL PARKS AT NIGHT